Valeton VLP-400 เอฟเฟคลูป

Valeton continue their looper innovation with the VLP-400, a dual looper that offers even more performance and improvisation flexibility. Run dual loops simultaneously, launch & tweak drum rhythm accompaniment on the fly, and inject creative effects with an assignable footswitch for truly dynamic, distraction-free performance.

Key Features

• Real-Time Dual Looping – Record, overdub, and replay two loops simultaneously with improved 32-bit playback, external footswitch support, 5-pin MIDI sync, and more.
• Flexible Drum Machine Accompaniment – Just like its little brother, the VLP-200, this dual looper is also a drum machine, but this time it’s footswitch-controllable with 100 built-in patterns.
• Extra Assignable Footswitch – Inject effects in seconds with an extra footswitch, from octave to freeze to fade and beyond.
• All Your Looping Projects In One Place – Built entire setlists, albums, or collections with 99 onboard project slots, with easy import/export via Valeton’s free software.

Independent Dual-Loopers

The VLP-400 footswitch offers independent control of recording and playback for both LOOP 1 and LOOP 2. Its built-in collaboration mode (SERIAL & FREE) lets you effortlessly play two loops in parallel or switch between them, making it easy to shape your performance.

Built-In Drum Machine

The VLP-400 is equipped with a new 100-stereo drum machine that features 24-bit, 48 kHz high-quality sampling. Offering a variety of drum kits (rock, pop, jazz, electronic, metal, and more), this drum machine can be independently controlled using dedicated footswitches. When recording a phrase loop, the VLP-400 will automatically synchronize it with the drum machine’s tempo, ensuring a perfect match. The AUTO mode lets you record a phrase and then activate the drum machine, which will automatically adjust to sync with the loop’s tempo.

Intelligent Overdubbing

The VLP-400 supports intelligent doubling of overdubs, allowing you to record over the existing track multiple times. Each overdub can be controlled to be an exact multiple of the current loop duration. If the overdub duration isn’t an integer multiple, the footswitch light will flash blue, indicating that recording will automatically stop once the length matches an integer multiple. For those who prefer traditional overdubbing, the “STACK” function can be accessed by long-pressing the “ASSIGNABLE” footswitch.

Enhanced Creative Control

Compared to the VLP-200, the VLP-400 introduces ASSIGN knobs and ASSIGNABLE footswitches, offering more ways to shape your sound. With just a few knob twists, you can activate 7 effects on your loops, including OCATVE, REVERSE, FREEZE, HALF, FADE, ONCE, and SOLO. When these effects are active, the footswitch lights will glow purple. Double-tapping the ASSIGNABLE footswitch allows you to stop and start both the loop and drum machine simultaneously for more dynamic control.

Serial Mode

In SERIAL mode, when both LOOP 1 and LOOP 2 contain music segments, you can use the footswitch to control the seamless switching between them. This allows you to switch between two different sections of your song and control its structure with ease. If LOOP 1 is active, you can record a new track on LOOP 2, and it will automatically start recording after the playback of LOOP 1 ends. Reactivating LOOP 1 during LOOP 2 recording will pause the recording and immediately start LOOP 1.

Free Mode

In FREE mode, LOOP 1 and LOOP 2 operate entirely independently, with no impact on each other’s recording duration. It’s like having two fully functional, separate loopers.ล

Specifications

• 32-bit/48kHz high performance audio recording and playback
• Two-channel inputs and two-channel outputs, supports mono and stereo devices
• The input channel (L/MIC) adopts XLR/TS mono interface, which supports microphone and instrument input
• Supports synchronization and additional control with external devices via 5-pin MIDI(IN/OUT) connections.
• Two footswitches (LOOP 1/LOOP 2) can independently control the recording and playback of LOOP 1 and LOOP 2
• The ASSIGNABLE footswitch can activate 7 loop effects functions: OCTAVE, REVERSE, FREEZE, HALF, FADE, ONCE, and SOLO.
• Supports two Loop playback modes: SERIAL and FREE
• Overdub supports doubling the length of the bottom track by integer multiples
• Support “STACK” dubbing recording
• Supports simultaneous stop and play functions for both LOOP and drum machine.
• Supports drum AUTO/SYNC function
• The AUTO drum machine mode automatically matches the drum machine BPM to the recorded loop.
• Built-in drum machine and loop synchronization function
• In AUTO mode, LOOP 1 and LOOP 2 can be aligned without the need to activate the drum machine.
• Built-in DRUM footswitch controlling drum machine switch and tempo
• The volume of LOOP 1/LOOP 2/DRUM can be controlled individually
• Supports external footswitches and customized footswitch functions
• Equipped with a headphone jack for convenient monitoring of your creations anytime, anywhere.
• The built-in storage space for 99 recording projects，and store up to 11 hours of stereo files
• 100 built-in rhythm patterns with metronome
• You can import and export recording projects and update firmware with supporting software via USB
• Rugged cast metal chassis
• Includes DC 9V power supply

Technical Info

• AD/DA: 32-bit, 48kHz
• Maximum project saving: 99
• Maximum recording storage: about 12 hours
• Recording format: WAV (32-bit, 48kHz, stereo)
• Drum rhythms: 100
• Playback modes: SERIAL and FREE
• Drum modes: AUTO and SYNC
• MIDI (IN/OUT): Standard 5-pin
• Analog Input connections
  • INPUT L/MIC: 1×1/4″ Unbalanced (TS) /XLR combo input
  • INPUT R: 1×1/4″ Unbalanced (TS)
  • Input Impedance: INST INPUT 1MΩ, MIC INPUT 4.7KΩ
• Analog output connections
  • OUTPUT(L/R): 2×1/4″ Unbalanced (TS)
  • Headphone Output: 1/8″ Stereo (TRS)
  • Output Impedance: OUTPUT 4.7kΩ, PHONES 16Ω
• USB Port: USB 2.0 Type-C Port
• Size and weight
  • Dimensions: 253mm(W)×165.3mm(D)×58mm(H)
  • Unit Weight: 1295g Power
• Power Requirements: DC 9V, 500mA, center negative