AMT P-DRIVE

FEATURES OVERVIEW

Drive Series effects are designed to be connected in front of a “clean” channel inputs

of guitar combos or amplifiers, and do not have a cabinet simulated output as the

Legend Amp Series. These pedals allow guitarists to obtain warm, crisp, natural tube

sounds of their favorite high gain amplifiers, while preserving individuality and tone

of the instrument and equipment.

In the Drive Series, AMT uses new original circuitry solutions developed by AMT

specialists based on real actual tube stage emulation and response. The result is

bright, rich, full, and powerful distortion sounds.

The AMT B-DRIVE was designed for guitarists looking for distoriton sounds similar to that

of Bogner* amplifiers.

 The pedal sensitivity and drive/distortion amount is determined by the position of

GAIN control.

 The overall output level is determined by the position of LEVEL control. It’s range of

adjustment provides the standard minimum level of -10dB and reaches +8 dB at it’s

maximum position.

 The pedal also features a simplified TONE control, which is designed for general tone

matching of the pedal to your amplifier. Further EQ adjustment may be made on the

expanded preamp section of your amplifer.

 A VOICE switch to cut some mids.

 Standard 9vDC (-) negative center power required. Voltage consumption is low,

running at only (less than 4mA) of power.

 TRUE BYPASS circuitry. No tone coloration, signal degregation, or loss while pedals

is not in use.

AMT P-DRIVE ถูกดีไซด์มาให้มีซาวด์ที่เหมือนกับแอมป์ชื่อดังรุ่น Bogner

 ปุ่ม GAIN คอนโทรลแบบเซนซิทีฟ

 ปุ่มโทนดีไซด์ย่านเลียงมาให้แมทกับแอมป์หลากหลายประเภท.

 ปุ่ม VOICE ออกแบบมาเพื่อตัดย่านเสียงกลาง

 ใช้ไฟแบบ สเตนดาร์ด 9V DC

 เป็นวงจรแบบทรูบายพาส