BEHRINGER DI-4000 V2 ดีไอบ๊อกซ์

BEHRINGER DI-4000 V2 D.I Box

ULTRA-DI PRO DI 4000

The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and ¼” TRS), a balanced XLR Output – and a ¼” Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

PRO-Active

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features “buffered” inputs that respect your source signal much better than passive DI boxes can – outputting optimally-balanced, extremely low-impedance (600 Ω) signals that are far less susceptible to noise and RF Interference (RFI).

¼” In, XLR Out – There has to be More?

When it comes right down to it, all DI boxes do the same thing, right? Yes, but the DI4000 does much more than just “bass guitar in, mic-level signal out.” It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you’d like to connect your guitar amp’s speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts – and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response – and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more – times four!

Specification

Audio Inputs

Audio Outputs

System Specifications

Power Supply

Physical

สเปค

สัญญาณขาเข้า

• ช่องต่อ: XLR และ 1/4″ TS
• ประเภท: DC-decoupled, unbalanced input (สัญญาณขาเข้าแบบไม่บาลานซ์ ตัด DC)
• ค่าความต้านทานขาเข้า: 220 kΩ (เมื่อไม่ได้เปิด Pad)
• ระดับสัญญาณขาเข้าสูงสุด: +20/+40/+60 dBu @ 1 kHz (ขึ้นอยู่กับการตั้งค่า Pad)

สัญญาณขาออก

• ช่องต่อ: XLR
• ประเภท: Transformer-balanced output stage (วงจรขาออกแบบบาลานซ์ใช้หม้อแปลง)
• ค่าความต้านทานขาออก: 600 Ω
• ระดับสัญญาณขาออกสูงสุด: +20 dBu

สเปคระบบ

• ย่านความถี่ (โหลด 100 kΩ): 23 Hz ถึง 60 kHz (±3 dB)
• ย่านความถี่ (โหลด 600 Ω): 23 Hz ถึง 40 kHz (±3 dB)
• ย่านความถี่ (ตัดความถี่สูง): 23 Hz ถึง 8 kHz (-3 dB)
• สัญญาณรบกวน: -90 dBu, 22 Hz – 22 kHz
• ความเพี้ยน: <0.01% @ 1 kHz, +20 dBu
• สัญญาณรบกวนระหว่างช่อง: -100 dBu @ 1 kHz

แหล่งจ่ายไฟ

• แหล่งจ่ายไฟแบบ Switch-mode autorange: 100-240 V ~50/60 Hz
• การใช้พลังงาน: 10 W
• ช่องต่อไฟ: Standard IEC connector

ขนาด

• ขนาด (สูง x กว้าง x ลึก): 44 x 483 x 136 mm (1.7 x 19 x 5.4 นิ้ว)

น้ำหนัก

• น้ำหนัก: 2.1 กก. (4.6 ปอนด์)