Line 6 Powercab 212 Plus

Powercab 212 Plus Active Stereo Guitar Speaker System

The Powercab^® 212 Plus active stereo guitar speaker system was specifically designed for use with professional modelers. If you are happy with your modeler’s onboard cabinet models and just want to hear the sound of your presets amplified, simply connect your modeler to Powercab 212 Plus, select Flat (FRFR) mode, and play.

Switching to Speaker Modeling mode on the Powercab 212 Plus enables you to take advantage of 12 proprietary onboard speaker models—which are not the same as either cabinet models or impulse responses—for a more organic “amp-in-the-room” playing experience. Modeled speakers range from classics such as “Greenback” and “Blue Bell” to modern designs, and may be mixed or matched. Also, because Powercab 212 Plus is a stereo amp, ping-pong delays, expansive reverbs, spacious modulation effects, and even dual-amp setups will sound the way you intend them to be heard.

Additional features include a rugged-yet-lightweight plywood cabinet with flip-out kickstands, a 2-inch LCD, 128 user preset locations, XLR direct outputs, MIDI In/Out, AES/EBU and L6 LINK^™ I/O, a multipurpose second input, and a USB audio interface. Third-party IRs may also be loaded and saved within presets.

Line 6 PowerCab 212 Plus Features:

• Custom coaxial 12″ guitar speakers and 1″ HF compression driver
• Integrated 500-watt stereo power amplifier with 131dB peak SPL
• 70Hz-20kHz frequency response and generous headroom supply accurate reproduction of your amp simulations
• 12 realistic classic guitar speaker models produce the sound and feel of a traditional guitar cab
• 128 user-loadable presets for third-party impulse responses
• L6 LINK/AES/EBU I/O for easy Helix integration and daisy-chaining
• MIDI I/O for preset switching and USB for preset editing via Mac or PC
• Easy-to-see backlit LCD display and illuminated knob
• Microphone-emulated XLR output allows for direct connection to a PA system
• Foldout kickstands allow for angled backline placement or angled floor monitor usage

Spec

• Configuration: 2 x 12″
• Speakers:12″ Eminence Coaxial Neodymium Speaker, 1″ Celestion CDX Compression Driver
• Total Power:500W
• Mono/Stereo:Stereo, Dual Mono
• Cabinet Type:Straight, Tilt back
• Open/Closed Back:Closed
• Inputs:2 x XLR-1/4″ combo, 1 x XLR (AES in/L6 link)
• Outputs:2 x XLR, 1 x XLR (AES out/L6 link)
• Other I/O:MIDI In, Out/Thru
• USB:1 x Type B
• Maximum Peak SPL:131dB SPL
• Frequency Range:70Hz-20kHz
• Construction Material:Poplar Enclosure
• Height:21.1″ x Width:28″ x Depth:12″
• Weight:47.6 lbs.