Strymon Iridium Amp & IR Cab เอฟเฟคกีตาร์ไฟฟ้า

Pack the Pedals. Leave the Mic and Amp.

Love your pedals but hate hauling an amp to practice or play out? The pedal-sized Strymon Iridium gives you the tube staging, tone stack, and touch response of three iconic amplifiers, each with three corresponding cabinet choices, all in a line-level stereo output, which you can send straight to FOH — no amp required. Iridium’s Class A JFET preamp handles your guitar and stomps just like a true tube amp. Its analog front end feeds a powerful 2-stage DSP processor that carefully approximates the tube bias, harmonic breakup, cone compression, and EQ interaction of some of your favorite front ends. Whether you’re playing the blues through a chunky American 1 x 12″ or raising the roof through a dimed British high-watt amp, the Strymon feels and handles much like your favorite stacks and combos. A preset switch gives the Iridium the functionality of a 2-channel amp for clean/dirty applications, with an additional 300 accessible via MIDI switch. Meanwhile, a front headphone jack lets you monitor yourself directly from the stage — no in-ears required.

Three essential tube amps

Strymon’s Matrix Modeling technology brings you compelling virtualizations of three iconic tube amps. Here’s what’s inside:

• Round — The Normal channel of a classic American 1 x 12″ is the basis for the Round amp’s mid-scooped, high-headroom character and gentle tube breakup. Unique to the circuit is the Iridium’s midrange control: at noon, you get all the chunk and quack of the original tone stack. At higher values, Tweed-era tones start to appear. Additional gain on the top end gives the Iridium a velvety crunch you’d never be able to coax out of the genuine article.
• Chime — The British Invasion owes more to the TB channel of this particular 30-watt combo than any other in history. At lower gain, the Chime channel is jangly and present, with great touch dynamics and a sweet harmonic breakup. Run it hot, and you get all the gain of the dimed original and beyond, with a frequency-shaped front-end boost implemented toward the top of the gain range to saturate and tighten up those crunch tones. As with the combo, the Iridium’s Middle control acts as a Tone Cut to roll off treble just before you hit those virtual power tubes.
• Punch — When meaty cleans and knobs-at-11 high gain are what you’re after, Iridium’s Punch amp preset is the option for you. It’s modeled after a particularly coveted British hundred-watter. Gain settings at 2:00 on the Iridium gets you that classic Plexiglas-paneled snarl and growl. Opening up the throttle moves you well into hot-rodded Van Halen territory and beyond.

Nine onboard speaker cabs

The Strymon Iridium comes stock with nine choice speaker cabinet impulse responses (IRs) from leading third-party manufacturers like OwnHammer and Celestion Digital. We at Sweetwater found these to be a great starting point for each of the onboard amps, with very little need to modify. Even so, if you’ve got a collection of custom or homemade cab IRs you’re picky about, the Iridium lets you load them in over USB using the free Strymon Impulse Manager, with support for mono/stereo files up to 500ms in 24-bit/96kHz quality. Here’s what comes onboard:

• Round A: Deluxe Reverb 1×12″ (OwnHammer) — Open-back Fender combo with a 1978 Fender CTS 12″ ceramic speaker
• Round B: Blues Junior 1×12″ (cabIR) — Open-back Fender combo with a Jensen C12N 12″ speaker
• Round C: Vibrolux 2×10″ (cabIR) —Open-back Fender combo with two 1965 Jensen C10NS 10″ speakers
• Chime A: AC30 2×12″ Alnico (OwnHammer) — Open-back Vox combo with two 2001 Celestion T0530 Alnico Blue speakers
• Chime B: 1×12″Alnico (Celestion) — Closed-back cab with a Celestion Alnico Blue 12″ speaker
• Chime C: Mesa 4×12″ (ValhallaIR) — “Half-back” Mesa cab (open top, sealed bottom) with two Mesa/Celestion Black Shadow MC-90 12″ speakers and two Mesa/Electro-Voice Black Shadow EVM-12L 12″ speakers
• Punch A: GNR 4×12″ (OwnHammer) — Closed-back Marshall cab with four 1971 Celestion Greenback G12M-25 12″ speakers
• Punch B: 2×12″ Vintage 30 (Celestion) — Open-back cab with two Celestion Vintage 30 12″ speakers
• Punch C: Marshall 8×12″ Alnico (cabIR) — Closed-back Marshall cab with four Celestion T652 Alnico speakers

Onboard room reverb

To further sell that amp-in-a-room vibe, the Strymon Iridium gives you four mesmerizing stereo room convolution reverbs in a simple 1-knob interface. Dial up to add some space to solos or pull back for a more intimate, focused feel.

Stereo ins and outs

The Strymon Iridium supports either mono or stereo pedal setups. So whether you run a single-pedal ship or a whole fleet, or stereo Strymon chorus and reverb pedals, Iridium has the I/O to suit your setup.

Hybrid analog/digital signal path

The key to the Iridium’s amp-like response is its Class A JFET preamp circuit, which gives you familiar touch dynamics and 20dB of pure analog gain to boost and saturate your input.

ARM/SHARC coprocessing

Strymon pedals are known for their powerful SHARC processors, and in this way, the Iridium is no different. But what is unique is how it handles the heavy lifting of both an amp modeler and a 500ms stereo IR convolver. An ARM coprocessor that’s optimized for high-speed communication with the SHARC ADSP-21375 gives the Iridium the seamless response of an analog pedal, whether you’re toggling between favorites or spinning knobs, along with 32-bit floating-point approximations of some beautifully modeled amps, cabs, and room reverbs.

Add and edit your own cab IRs

Loading your own stereo cab IRs into the Strymon Iridium — up to 500ms and 24-bit/96kHz resolution — is no problem using the free Impulse Manager software. Connect the Iridium’s USB jack to your computer, then drag and drop.

Expression pedal input

Plug a standard expression pedal TRS cable into the Iridium’s EXP/MIDI jack, and you can adjust volume settings (pre- or post-preamp) or morph seamlessly between knob positions.

300 favorites

You can also save and access full sets’ worth of favorite presets by inserting a Strymon DIN-to-TRS MIDI cable into the EXP/MIDI jack and connecting a MIDI controller. Take it from guitarists at Sweetwater: if you’re searching for meticulously modeled amp tones in a familiar pedal format, you can trust your setup to the Strymon Iridium.

Effects Pedal for Electric Guitar

• • 24 bit/96 kHz 500 millisecond IR specification offers extremely detailed amp/cab simulations
  • 3 Matrix-modelled amplifier models based on some of the most sought-after American and British amplifiers
  • 4 Presets (3 plus onboard favourite) with a MultiSwitch Plus (300 via MIDI)
  • 9 Directly selectable IR cabinet models (300 via MIDI)
  • USB port for loading IR files and firmware updates
  • Load your own impulse responses with the free Strymon Impulse Manager software
  • Headphone connection enables silent rehearsals and latency-free monitoring
  • Controls: Drive, Level, Bass, Middle, Treble, Room
  • Switches: Amp Mode, Cab Mode
  • LED: Effect on, Favorite
  • Footswitch: Effect bypass, Favorite
  • Mono/Stereo input via 2 x 6.3 mm jack
  • Mono/Stereo output via 2 x 6.3 mm jack
  • EXP input
  • Power adapter connection: Barrel plug socket 5.5 x 2.1 mm, negative polarity inside
  • Power supply via 9 V DC power adapter (included)
  • Dimensions (W x D x H): 102 x 114 x 44 mm
  • Made in USA

รายละเอียด เอฟเฟค Strymon Iridium Amp & IR Cab

•  IR 24 บิต / 96 kHz 500 มิลลิวินาทีนำเสนอการจำลองแอมป์ / คาบิเนตที่ละเอียดมาก
• แอมพลิฟายเออร์จำลองแบบเมทริกซ์ 3 รุ่นโดยอิงจากแอมพลิฟายเออร์อเมริกันและอังกฤษที่เป็นที่ต้องการมากที่สุด
• 4 Presets (3 รายการโปรดบนบอร์ด) พร้อม MultiSwitch Plus (300 ผ่าน MIDI)
• 9 รุ่นตู้ IR ที่เลือกได้โดยตรง (300 ผ่าน MIDI)
• พอร์ต USB สำหรับโหลดไฟล์ IR และอัพเดตเฟิร์มแวร์
• โหลดการตอบสนองแรงกระตุ้นของคุณเองด้วยซอฟต์แวร์ Strymon Impulse Manager ฟรี
• การเชื่อมต่อหูฟังช่วยให้การซ้อมเงียบและเป็นส่วนตัว
• การควบคุม: Drive, Level, Bass, Middle, Treble, Room
• สวิตช์: โหมดแอมป์, โหมดแค็บ
• LED แสดงรายการEffect on, Favorite
• Footswitch: Effect bypass, Favorite
• อินพุตโมโน / สเตอริโอ แบบ 6.3 มม 2 ช่อง
• เอาต์พุตโมโน / สเตอริโอ แบบ 6.3 มม 2 ช่อง
• อินพุต EXP
• การเชื่อมต่ออะแดปเตอร์ไฟฟ้า: ช่องเสียบปลั๊ก Barrel 5.5 x 2.1 มม. ด้านในขั้วลบ
• แหล่งจ่ายไฟผ่านอะแดปเตอร์ไฟ DC 9 V
• ขนาด 102 x 114 x 44 มม
• ผลิตในอเมริกา